SHAFT - H.C.V. - UR16887-X

This is the Transverse Operating Shaft for the rear Height Control Valve. As weight is added to the car a linkage to the rear suspension trailing arms causes the shaft to rotate. The eccentric central post operates an internal valve, allowing pressurised hydraulic fluid to the Rear Height Control rams, which corrects the height of the rear of the car.

When overhauling the rear Height Control Valve, we recommend replacing this shaft if there is any corrosion evident on the shaft, as this will damage the seals and allow fluid to escape.

We also recommend replacing the bushes at either end of the shaft UR17828-X and using the Prestige Parts high-ENB EPDM Seal Kit RH2436-X.

Application:

• Bentley Corniche (chassis 10122-35465), T Coachbuilt (chassis 1501-9539), T Saloon (chassis 01001-26634) & T2 Saloon (chassis 30046-41573)
• Rolls-Royce Camargue (chassis 14674-33187), Corniche (09770-35878), Silver Shadow Coachbuilt (chassis 01067-09769) & Silver Shadow Saloon (chassis 01002-26700), Silver Shadow II (chassis 30001-41674) & Silver Wraith II (chassis 30083-41648)