HEIGHT CONTROL VALVE O RING KIT HI ENB - RH2436-X

You should consider replacing the special bushes UR17828 on the height control shaft, which can wear, allowing the shaft to move and fluid to bypass the seal. The O Rings in this kit have been manufactured from a high-ENB ethylene propylene diene monomer compound. This was following reports of shrinkage in service of seals in the market, causing leakage from the height control valve. The high-ENB compound was selected following consultation with a leading specialist in sealing materials and following laboratory testing under temperature controlled conditions. These O Rings have been specially tooled for the Prestige Parts range, and are distinguishable from non-conforming O Rings by the yellow dot on each O Ring.

Two bushes required per valve (or four required per car).

Model Application Summary:

Bentley: T1 1965-1976 (1001 to 26634) | T2 1976-1981 (30001 to 41601)

Rolls-Royce: Camargue 1973-1979 (14674 to 33187) | Corniche 1970-1979 (9770 to 35878) | Silver Shadow 1965-1976 (1001 to 26703) | Silver Shadow (2 Door) 1965-1971 (1067 to 9769) | Silver Shadow II 1976-1981 (30001 to 41601) | Silver Wraith II 1977-1981 (30083 to 41648)

Please contact our parts team if you have any questions regarding this part and suitable fit for your vehicle.