Why you should replace the Gearbox Key Washer RG7392 for your Rolls-Royce Silver Dawn & Wraith & Rolls-Royce Mk VI & R Type

   May 11, 2018 21:07:46 PM
key washerĀ should be fitted in place of the original key washer RG7392, which was found to be prone to cracking. RG5829 is 0.050" thicker than the original washer part number RG7392. Failure to replace with the strengthened key washerĀ or replacing with RG7392, can leave the gearbox prone to serious failure. This modification applies to the following cars:
  • Rolls-Royce Silver Dawn & Silver Wraith
  • Bentley Mk VI & R-Type
Gearboxes marked "W1" & W2" have already been equipped with this modification. How to fit:Ā RG5829 & Link to Fitting Instructions   [embed]https://www.youtube.com/watch?v=QDyu0_rgzIc&t=2s[/embed] Matt Duncan explains why this gearbox key washer does need to be replaced for these vehicles. "Welcome Back! Today I am going to talk to you aboutĀ this modified thrust washer Bentley Mk VI & R TypeĀ manual gearboxes. The part number isĀ RG5829 and it replaces RG7392. It's the thrust washer for the third speed gear.Ā It's 50 thou thicker. This was a factory modification forĀ the gearboxes after production. They did modify the gearboxesĀ so if it's a later gearbox it might alreadyĀ have this modification. If so, you'll findĀ that stamped on the boss of the second motion shaftĀ W1 or W2. If it's got that stamped on theĀ second motion shaft boss then it's already got the modification andĀ you don't need to do it. If you're rebuilding a gearboxĀ then you need to replace this. The old one can crackĀ and cause failure so it's a modification that needs to be carried outĀ if you're reconditioning a gearbox.Ā That's all for today!"   Check the RR - Technical Video Library for more.]]>

Tags

Comments
Leave your comment
Your email address will not be published