DIAPHRAGM CLUTCH UPGRADE KIT - RH7199KT-X

• Bentley Mark VI & R-Type
• Rolls-Royce Silver Dawn & Silver Wraith

This replacement clutch assembly is designed to remove clutch judder and vibration commonly experienced when using replacement modern clutch friction lining materials.

The original clutch was designed for use with asbestos-based friction linings and with the abolition of the asbestos-based lining materials, clutch harshness and judder has become a common experience. This is difficult or impossible to cure using modern friction lining materials, often requiring several very labour-intensive and costly iterations of fitting and testing, with no guarantee of completely smooth clutch operation.

The Prestige Parts® replacement diaphragm-type clutch uses a completely new mechanism, designed for use with modern friction lining materials, and has been developed with the technical input of renowned Rolls-Royce and Bentley specialists. This kit may be used to replace both 10 inch and 11 inch clutches on both left and right hand drive post-war Rolls-Royce and Bentley vehicles equipped with manual gearboxes and comes with a three-year warranty.

RH7199KIT consists of the following components:

• Flywheel
• Diaphragm Clutch
• Drive Plate
• Flywheel Bolts (3/8n UNF, x12)
• Flywheel Aero Nuts (3/8n UNF, x12)
• Flywheel Spigot Bearing
• Clutch Release Bearing
• Bolts (1n x 3/8n UNF, x6)
• Spring Washers (x6)
• Steel Dowel (20 x 8 mm, x3)
• Wooden Dowel Rear Mains Oil Seals (x2)
• Engine Sump Gasket

Front Cover Gasket Fitting Instructions are available here.