Receiver Drier in. They're available on the shelf and obviously oil! You always want to make sure that you get the correct level of oil in the compressor before you install it. What we always used to do when fitting a compressor was to drain it completely and refill it with the correct amount of oil. This is the correct, compatible oil for R134A gas. It's available and on the shelf. Also, the Expansion Valve.. This is a place where you can get contaminants in there so you want to make sure you change your expansion valve. The early Silver Spirit didn't have a Receiver Drier or an Expansion Valve, they just had a unit which incorporated a drier and an Expansion Valve. For that you have to open it and change the actual component that dries it out which is this Dessicant Bag Kit. So for early Silver Spirits this is what you get for the Receiver Drier and this goes all the way up to 1987 when the later Sanden Type Compressor came out. This should be a solution to Air Conditioning problems.
Any questions, please feel free to comment below. Apart from that enjoy the summer!"
Check the RR - Technical Video Library for more.]]>
0 comments